Premium Disc
GRIND250-046
A premium-grade diamond disc with 20 round segments for smooth, consistent grinding performance. Designed for versatility, it delivers excellent results on a multitude of surfaces — from concrete and screeds to coatings — leaving a clean, even finish that’s ready for further preparation or coating applications.
20 Seg Blue Grinding Disc
GRIND250-045
Engineered for soft or abrasive surfaces, this 20-segment hard-bond diamond disc minimises diamond wear while maintaining fast, even grinding action. Perfect for tackling soft concrete and surface coatings, it offers exceptional durability and cost efficiency, allowing operators to achieve a consistent finish without excessive tool wear.
20 Seg Red Grinding Disc
GRIND250-047
A 20-segment soft-bond diamond disc for hard or dense concrete surfaces, offering aggressive grinding action with a long working life. Its advanced bond formulation ensures extended wear and efficient material removal, making it ideal for challenging substrates where standard discs struggle to cut effectively.
20 Seg Yellow Grinding Disc
GRIND250-044
A versatile, 20-segment diamond grinding disc designed for general-purpose surface preparation. Ideal for grinding and smoothing concrete, screed, and similar materials, it delivers consistent performance across a range of site conditions. The intermediate bond offers the perfect balance between cutting speed and tool longevity, ensuring reliable results and excellent value on every project.
Twin PCD Plate
GRIND250-076
This heavy-duty PCD plate features six twin-tooth Polycrystalline Diamond tools, purpose-built for the rapid removal of thick or sticky coatings, including epoxy, mastics, adhesives, paints, and resins. The twin-tooth configuration reduces surface contact for faster cutting and minimal heat build-up, delivering clean, efficient removal of even the toughest materials.
Triple PCD Plate
GRIND250-028
A precision-engineered triple-tooth PCD plate designed for the quick, efficient removal of thin adhesives, paints, and coatings. Its triple-tooth layout increases contact points for finer control and smoother results, maintaining productivity and extending tooling life when tackling light to medium-duty removal tasks.
Twin PCD
GRIND-018
High-performance Polycrystalline Diamond (PCD) shoes engineered for fast, clean removal of thin coatings, mastics, adhesives, and epoxies. The twin-tooth design scrapes rather than grinds, preventing heat build-up and clogging, ensuring exceptional cutting efficiency and long life across tough surface removal jobs.
Triple PCD
GRIND-020
A triple-tooth PCD shoe designed for maximum removal power and smooth operation. Ideal for tough coatings, glues, and adhesives, its extra cutting points provide greater stability and faster progress while maintaining a clean surface ready for refinishing.
PCD Air Grinding Disc 15 piece
GRIND250-112
PCD Air Grinding Disc 15 piece. PCD (Polycrystalline Diamond) grinding discs are specialised abrasive discs designed for high-efficiency material removal, particularly on tough surfaces such as coatings, adhesives, epoxy, paint, and bitumen.
PCD with Diamonds
GRIND250-127
PCD tips that scrape coatings without generating excessive heat, it prevents soft materials from becoming tacky or clogging the tool—ensuring consistent performance and maximum efficiency. The addition of 10 supporting diamond segments provides simultaneous light grinding action, helping to remove surface layers and lightly abrade the substrate. This dual-action design not only enhances coating removal but also refines the surface in a single pass, improving preparation speed and finish quality.
Air Diamond Disc
GRIND250-093
16/20 Grit, Medium Bond, 20 Segment (Aggressive Removal) Engineered for aggressive stock removal, this 16/20 grit, medium bond, 20-segment disc delivers excellent grinding performance on tough surfaces. Ideal for removing thick coatings, very thin adhesives, and levelling uneven or heavily patched concrete floors.
Air Diamond Disc
GRIND250-090
30/40 Grit, Medium Bond, 20 Segment (General Purpose) This versatile 30/40 grit, medium bond, 20-segment grinding disc offers consistent smoothing and surface refinement, making it ideal for general subfloor preparation. It effectively removes surface imperfections, levels joints, and prepares concrete or cementitious floors for further treatment.
Air Diamond Disc
GRIND250-089
30/40 Grit, Soft Bond, 20 Segment (Hard Substrates) Optimised for hard or dense concrete surfaces, this 30/40 grit, soft bond, 20-segment grinding disc offers superior cutting action where medium bonds struggle. Its soft bond structure ensures consistent wear and fast material removal on harder substrates.
PPC 250 Front Brush
GRIND250-002
The PPC250 Grinder Front Brush is designed to create a secure seal against the floor at the front of the machine, ensuring maximum dust containment and cleaner operation. By efficiently directing debris toward the extraction system, it helps maintain a safer, dust-free working environment while protecting both the operator and surrounding areas. Durable and easy to fit, this brush enhances overall grinding performance, visibility, and site cleanliness, making it an essential accessory for professional surface preparation.
PPC 250 Rear Brush
GRIND250-006
The PPC250 Grinder Rear Brush is precision-engineered to create a seal at the back of the grinder, ensuring effective dust containment and efficient extraction during operation. It prevents debris from escaping the work area, maintaining a clean, professional finish and a healthier environment for the operator. Built for durability and easy installation, this rear brush works seamlessly with the front brush to deliver optimal dust control and superior surface preparation performance.
PPC 250SP Drive Plate with Velcro
GRIND250SP-018
Heavy-duty metal backing plate for PPC 250SP with industrial-grade Velcro surface allows for fast, secure attachment of polishing pads, ensuring they stay firmly in place during operation while still enabling quick pad changes.
PPC 250SP Dust Skirt Strip
GRIND250SP-015
Dust skirt strip (in 2 pieces)(Also order BOLT-024 & WASHERS-009 x 8no of each) In order for the alignment of the screw holes to be correctly aligned please be aware that this is not predrilled.
230mm Sunshine Pad 50 Grit
GRIND230- 008
Suitable for PPC250SP
Stage 1 – 50 Grit Sunshine Pad.
The first step in the Sunshine Pad system, this 50 grit pad removes surface laitance, light coatings, or rough inconsistencies. It opens the surface and begins the refinement process, setting the foundation for a high-gloss finish. Ideal for cream or light-finished concrete, it retains flexibility to adapt to floor contours while preparing the floor for progressive polishing.
230mm Sunshine Pad 100 Grit
GRIND230-009
Suitable for PPC250SP
Stage 2 – 100 Grit Sunshine Pad.
The 100 grit pad smooths the surface further after the initial cut, removing coarser scratch patterns and levelling minor surface flaws. It begins to tighten the surface, enhancing clarity early in the process. Its flexible design supports consistent polishing, especially on lighter coloured or decorative floors where clarity is key.
230mm Sunshine Pad 200 Grit
GRIND230-010
Suitable for PPC250SP
Stage 3 – 200 Grit Sunshine Pad.
This pad advances the floor towards a low-sheen finish, eliminating finer scratches and continuing surface refinement. Perfect for floors aiming for light, uniform cream finishes, the 200 grit Sunshine Pad prepares the surface for shine development, with a flexible matrix that
ensures consistent contact and results.
230mm Sunshine Pad 400 Grit
GRIND230-011
Suitable for PPC250SP
Stage 4 – 400 Grit Sunshine Pad.
The 400 grit Sunshine Pad introduces a subtle satin finish, ideal for floors requiring a soft, clean look. It enhances the smoothness and begins to reflect light more evenly. The pad’s flexibility allows it to follow floor variations closely, critical for achieving clarity in cream polished or light-toned floors.
230mm Sunshine Pad 800 Grit
GRIND230-012
Suitable for PPC250SP
Stage 5 – 800 Grit Sunshine Pad.
This stage produces a noticeable, even sheen with growing levels of reflectivity and depth. The 800 grit Sunshine Pad is perfect for interior polished concrete projects, where a warm, clean look is desired. Its flexible construction enables it to bring out a smooth, consistent appearance even on imperfect surfaces.
230mm Sunshine Pad 1500 Grit
GRIND230-013
Suitable for PPC250SP
Stage 6 – 1500 Grit Sunshine Pad.
At 1500 grit, this pad achieves a high-sheen finish with impressive clarity. It Significantly enhances the depth and reflectivity of the floor, making it ideal for commercial or decorative settings where presentation is key. Designed for use on light/cream concrete or terrazzo, it maximises gloss while maintaining a smooth, flexible motion across the floor.
230mm Sunshine Pad 3000 Grit
GRIND230-014
Suitable for PPC250SP
Stage 7 – 3000 Grit Sunshine Pad.
The final stage delivers a super high-gloss finish with exceptional clarity and light reflection. The 3000 grit Sunshine Pad brings out the maximum possible shine, particularly effective on cream finishes where brightness and elegance are the desired outcome. Its high flexibility ensures consistent results, even on floors with slight variations, making it ideal for premium interior polishing.
230mm Polishine Pad 50 Grit
GRIND230-001
Suitable for PPC250SP
Stage 1 – 50 Grit Polishine Pad
Designed for the initial grinding stage, this coarse 50 grit Polishine Pad begins the surface refinement process by removing scratches, very light coatings, or surface contamination. Its flexible fibre base easily adapts to uneven floor surfaces, making it ideal for early preparation. A cost-effective solution with a long lifespan and dependable cutting power for concrete, terrazzo, or cementitious floors.
230mm Polishine Pad 100 Grit
GRIND230-002
Suitable for PPC250SP
Stage 2 – 100 Grit Polishine Pad.
Used after initial grinding, the 100 grit Polishine Pad provides effective smoothing of rough surfaces, Removing marks left by the 50 grit pad. It continues to even the floor profile while maintaining flexibility across inconsistencies. With its durable design and long life, this pad delivers excellent performance and productivity on most subfloors.
230mm Polishine Pad 200 Grit
GRIND230-003
Suitable for PPC250SP
Stage 3 – 200 Grit Polishine Pad.
At 200 grit, the pad transitions the process from grinding to Honing. It further refines the surface, closes pores, and prepares the floor for higher gloss levels. Its fibre-backed structure maintains consistent contact, even on uneven Surfaces, ensuring clarity begins to develop without compromising cost-efficiency or pad life.
230mm Polishine Pad 400 Grit
GRIND230-004
Suitable for PPC250SP
Stage 4 – 400 Grit Polishine Pad.
This pad starts to bring out a subtle low-sheen finish, ideal for clients seeking a honed appearance. The 400 grit Polishine Pad smooths the surface further and enhances visual consistency. Its flexible base and Robust diamond matrix allow for efficient honing on concrete, terrazzo, and cementitious floors.
230mm Polishine Pad 800 Grit
GRIND230-005
Suitable for PPC250SP
Stage 5 – 800 Grit Polishine Pad.
Perfect for introducing a noticeable shine and light reflectivity, the 800 grit pad enhances surface clarity while continuing to close and tighten the surface. Designed for longevity and excellent value, it maintains productivity and shine consistency even across large or uneven areas.
230mm Polishine Pad 1500 Grit
GRIND230-006
Suitable for PPC250SP
Stage 6 – 1500 Grit Polishine Pad.
The 1500 grit Polishine Pad brings out a high-sheen finish with improved depth and clarity. Ideal for polished concrete and decorative flooring, it’s both durable and flexible, offering great coverage and lifespan. A popular choice for achieving a refined appearance without the cost of resin-based alternatives.
230mm Polishine Pad 3000 Grit
GRIND230-007
Suitable for PPC250SP
Stage 7 – 3000 Grit Polishine Pad.
The final stage in the system, this pad produces a deep, glossy finish with exceptional surface clarity and reflectivity. Suitable for high-end concrete and terrazzo polishing projects, the 3000 grit Polishine Pad maintains superior performance across uneven floors thanks to its fibre base, offering a long-lasting, economical option for premium results.
Hose
DUCTING-005
38mm PVC Ducting is used to connect the dust extractor to equipment.
110v 32amp Extension Cable
ELEC-015
14m complete with fitted plug and socket. Suitable for 110v Grinders and PPC 250SP Grinder.
5 Kva Transformer
ELEC-011
For converting standard 240v electric into site safe 110v electric. Intermittent rating of 5000W – Continuous rating of 2500W. Suitable for 110v Grinders and PPC 250SP Grinder.
415v 32amp Extension Cable
ELEC-136
Extension Lead with plug and socket 6mm x 25m. Suitable for 415v Grinders and PPC 250 Grinder.
SPARES ARE AVAILABLE FOR GENERAL MAINTENANCE AND REPAIRS IF REQUIRED.